Sold Out
Specifications
| Directional pattern: | Supercardioid |
| Principle of operation: | Pressure gradient |
| Cartridge type: | Pre-polarized condenser |
| Frequency range: | 20 Hz – 20 kHz |
| Frequency range, ± 2 dB, at 12 cm (4.7 in): | 100 Hz – 16 kHz with 3 dB soft boost at 12 kHz. Permanent 3rd order low-cut filter (-3 dB at 80 Hz). |
| Sensitivity, nominal, ± 2 dB at 1 kHz: | 5 mV/Pa; -46 dB re. 1 V/Pa |
| Equivalent noise level, A-weighted: | Typ. 19 dB(A) re. 20 µPa (max. 21 dB(A)) without attenuation |
| S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): | Typ. 75 dB(A) |
| Total Harmonic Distortion (THD): | < 1 % up to 139 dB SPL peak |
| Dynamic range: | Typ. 120 dB
|
| Max. SPL, peak before clipping: | 160 dB |
| Switchable attenuator: | 0 dB / -10 dB |
| Output impedance: | < 100 ohm |
| Minimum load impedance: | 1 kohm |
| Cable drive capability: | 100 m (328 ft) |
| Output balance principle: | Impedance balancing with Active Drive |
| Common Mode Rejection Ratio (CMRR): | > 50 dB at 1 kHz |
| Power supply (for full specifications): | 48 V Phantom power (± 4 V) |
| Current consumption: | Max. 5 mA |
| Connector: | XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: – phase |
| Color: | Matte black |
| microphone weight: | 245 g (8.6 oz) |
| Microphone diameter: | 50 mm (2.0 in) |
| Capsule diameter: | 19 mm (0.75 in) |
| Microphone length: | 195 mm (7.7 in) |
| Output voltage, RMS: | > 5 V |
| Polarity: | +V at pin 2 for positive sound pressure |
| Temperature range: | -40 °C to 45 °C (-40 °F to 113 °F) |
| Relative Humidity (RH): | Up to 90% |
