$89.00 AUD
$399.00 AUD
$459.00 AUD
Exceptional audio quality
Uniform, consistent sound between DPA mics
Extremely rugged and reliable
Diminutive size made for flexible and easy concealment
Large selection of clips, windscreens, grids and other accessories
Modular adapter system fits most professional wireless systems
| Directional characteristics: | Omnidirectional |
| Principle of operation: | Pressure |
| Cartridge type: | Pre-polarized condenser element with vertical diaphragm |
| Frequency range, ± 2 dB: | Soft boost grid: 20 Hz – 20 kHz, 3 dB soft boost at 8 – 20 kHz. High boost grid: 20 Hz – 20 kHz, 10 dB boost at 12 kHz. |
| Sensitivity, nominal, ±3 dB at 1 kHz: | 20 mV/Pa; -34 dB re. 1 V/Pa |
| Equivalent noise level A-weighted: | Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A)) |
| Equiv. noise level ITU-R BS.468-4: | Typ. 35 dB (max. 38 dB) |
| S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): | 71 dB(A) |
| Total harmonic distortion (THD): | < 1 % THD up to 123 dB SPL peak; < 1 % THD up to 120 dB SPL RMS sine |
| Dynamic range: | Typ. 100 dB |
| Max. SPL, peak before clipping: | 134 dB |
| Output impedance: | 30 – 40 ohm |
| Cable drive capability: | Up to 300 m (984 ft) |
| Power supply: | For wireless For wireless systems: Min. 5 V – max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance. |
| Connector: | MicroDot |
| Color: | Black, beige, brown or white |
| Microphone weight: | 7.5 g (0.26 oz) incl. cable and MicroDot connector |
| Microphone diameter: | 5.4 mm (0.21 in) |
| Microphone length: | 12.7 mm (0.5 in) |
| Cable length: | 1.8 m (5.9 ft) |
| Polarity: | Positively increasing sound pressure produces positive going voltage on MicroDot pin |
| Temperature range: | -40 °C to 45 °C (-40 °F to 113 °F) |
| Relative Humidity (RH): | Up t 90% |
