| Directional pattern: |
Cardioid |
| Principle of operation: |
Pressure gradient |
| Cartridge type: |
Pre-polarized condenser |
| Frequency range: |
20 Hz - 20 kHz |
| Frequency range, ± 2 dB, at 30 cm: |
40 Hz - 20 kHz |
| Sensitivity, nominal, ± 2 dB at 1 kHz: |
10 mV/Pa; -40 dB re. 1 V/Pa |
| Equivalent noise level, A-weighted: |
Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A)) |
| Equivalent noise level, ITU-R BS.468-4: |
Typ. 25 dB |
| S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): |
Typ. 76 dB(A) |
| Total Harmonic Distortion (THD): |
< 1 % up to 139 dB SPL peak |
| Dynamic range: |
Typ. 121 dB |
| Max. SPL, peak before clipping: |
144 dB |
| Output impedance: |
100 Ω |
| Minimum load impedance: |
2 kΩ |
| Cable drive capability: |
100 m (328 ft) |
| Output balance principle: |
Impedance balancing |
| Common Mode Rejection Ratio (CMRR): |
> 40 dB |
| Power supply (for full specifications): |
48 V Phantom power (± 4 V) |
| Current consumption: |
3.5 mA |
| Connector: |
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase |
| Color: |
Matte black |
| Weight: |
109 g (3.8 oz) |
| Microphone diameter: |
19 mm (0.75 in) |
| Capsule diameter: |
19 mm (0.75 in) |
| Microphone length: |
35 mm (1.38 in) |
| Output voltage, RMS: |
2.2 V |
| Polarity: |
+V at pin 2 for positive sound pressure |
| Temperature range: |
-40 °C to 45 °C (-40 °F to 113 °F) |
| Relative Humidity (RH): |
Up to 90% |
| Matching tolerance: |
± 1 dB |
| Phase deviation for kit: |
< 10° |
$89.00 AUD
$399.00 AUD
$459.00 AUD
