New Ceramics!

This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

Sold Out

TC Electronic D22 Broadcast Delay (B-Stock - Ex Demo - Used) - 1 Only!

This product is in as-is condition. Welcome to inspect at our facility. 

Precision. Control. Reliability.

D22 is all about precise and reliable delay, as broadcasted audio needs to be 100% aligned and 'in-sync'. Therefore, you may sometimes have to insert just a slight delay. It may seem like an insignificant adjustment, but in reality, it makes all the difference!

    •    Make It Fit - High-resolution Delay for Broadcast Master Control and Linking
    •    Take Total Control - Nudge and Tap Keys for Easy Front-panel Adjustments
    •    Flexible Format Handling - Delays Linear Audio as well as Dolby E or AC3 Streams

Unique Interface

You can display the delay resolution in frames, sub-frames, milliseconds and sub-milliseconds
(0.1 ms increments).

The tapped delay time can be previewed before insertion, or you can choose to apply delay time immediately.

You also get a 'Set and Forget' lock function if you use D22 in a 'fixed' environment.

Remote Control

You can remote control D22 via an RS-485 connector which allows you to change the delay time, or even the full setup, from a distance.

GPI (General Purpose Impulse) even gives you to external control of Tap Tempo as well as the Master Fader output.

Ultimate Hardware

Industry-leading 24-bit AES/EBU, S/PDIF and AD/DA converters are just part of the story.

Even when bypassing D22, true 24-bit resolution is maintained, leaving the digital signal untouched.

When used in Analog setups, D22 features hardwired bypass for an uninterrupted signal flow in case of loss of power.

Specification
Digital Inputs and Outputs
Connectors

XLR (AES/EBU) RCA Phono (S/PDIF)

Formats

AES/EBU (24 bit), S/PDIF (20 bit), EIAJ CP-340, IEC 958

Output Dither

HPF TPDF dither 8-24 bit

Word Clock Input

BNC, 75 Ohm, 0.6 to 10 Vpp

Sample Rates

32 kHz, 44.1 kHz, 48 kHz

Processing Delay

0.5 ms @ 48 kHz

Frequency Response DIO

DC to 23.9 kHz ± 0.01 dB @ 48 kHz

Sample Rate Conversion Type

Asynchronous

Dynamic Range

120 dB

THD+N

-106 dB 44.1 to 48 kHz @ 1 kHz, -2 dBFS

Analog Inputs
Connectors

XLR balanced (pin 2 hot)

Impedance

20 kOhm (balanced)

Max. Input Level

+27 dBu (balanced)

Min. Input Level (for 0 dBFS)

-4 dBu (balanced)

A to D Conversion

24 bit (1 bit, 128 times oversampling)

A to D Delay

0.8 ms @ 48 kHz

Dynamic Range

>103 dB (unweighted), >106 dB(A)

THD

-95 dB (0.0018 %) @ 1 kHz, -6 dBFS (FS @ +18 dBu)

Frequency Response

10 Hz to 20 kHz: +0/-0.2 dB

Crosstalk

<-80 dB, 10 Hz to 20 kHz typical -100 dB @ 1 kHz

Analog Outputs
Connectors

XLR balanced (pin 2 hot)

Bypass

Through relay

Impedance

40 Ohm (balanced)

Max. Output Level

+26 dBu (balanced)

Full Scale Output Range

-4 dBu to +26 dBu (balanced)

D to A Conversion

24 bit (1 bit, 128 times oversampling)

D to A Delay

0.57 ms @ 48 kHz

Dynamic Range

>100 dB (unweighted), >104 dB(A)

THD

-86 dB (0.005 %) @ 1 kHz, -6 dBFS (FS @ +18 dBu)

Frequency Response

10 Hz to 20 kHz: +0/-0.5 dB

Crosstalk

<-60 dB, 10 Hz to 20 kHz typical -90 dB @ 1 kHz

EMC
Complies with

EN 55103-1 and EN 55103-2 FCC part 15, Class B CISPR 22, Class B

Safety
Certified to

IEC 65, EN 60065, UL 1419 and CSA E65

Environment
Operating Temperature

32° F to 122° F (0° C to 50° C)

Storage Temperature

-22° F to 167° F (-30° C to 70° C)

Humidity

Max. 90% non-condensing

PCMCIA Interface
Connectors

PC Card, 68 pin type 1 cards

Standards

PCMCIA 2.0, JEIDA 4.0

Card Format

Supports up to 2 MB SRAM

Control Interface
RS485/RS422

In/Out/Through: 5 Pin DIN

GPI, Pedal, Fader

1/4 inch phone jack

General
Finish

Anodized aluminum face and top plate, Plated and painted steel chassis

LCD

56 x 128 dot graphic LCD-display

Dimensions

19" x 1.75" x 8.2" (483 x 44 x 208 mm)

Weight

5.2 lb. (2.35 kg)

Mains Voltage

100 to 240 VAC, 50 to 60 Hz (auto-select)

Power Consumption

<20 W

Backup Battery Life

>10 years

Notify me when this product is available:

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Search